Clarice Kitchen Cabinets December 29th, 2017 - 12:36:27
Custom Cabinet Cost Most people want to know how much more custom cabinetry will cost as compared to stock cabinets. This is almost impossible to answer with any degree of accuracy. The real truth of the matter is that custom cabinets are going to cost more that the lower lines of comparable stock cabinetry. But we have seen custom cabinets be very competitive with the mid to higher range stock cabinets. Despite the higher prices of custom kitchen cabinets it is almost always worth the extra cost. The cabinets are built in a much more solid fashion as well as most custom cabinetmakers will use a ¾ inch thick cabinet case material, it doesnt get much more solid than that. All cabinet shops will have varying prices, so we do recommend you always compare the same exact kitchen design from shop to shop for the most accurate estimations.
Refinishing kitchen cabinets or refacing them, instead of cabinet replacement, lets you upgrade your kitchen at a price you can afford and allows for the new custom look you desire. If you are planning to remodel your kitchen you have found out that it is not cheap and that a significant portion of the cost is for cabinetry. Also, new kitchen cabinets can be costly and time consuming to install. All is not lost though. As long as your cabinets are in decent shape, with these alternatives you can give your kitchen a fabulous new look quickly, without busting your budget.
2. Now that you have the top of the base cabinets marked, measure up another 19 1/2 inches and a level line across the wall to indicate the bottom of the wall cabinets. Lightly mark each cabinets dimensions and placement on the wall to make sure that your original layout is correct. 3. Use a stud finder to locate the wall studs. Use a pencil to mark the stud locations at least 6 inches above and below the line for the bottom of the wall cabinets. Draw straight vertical lines between the top and bottom marks to indicate the center of the studs. 4. If you decided to go with the piece of 1 x 3 lumber, now is where you will use (if you decided to go with the U-shaped frame, it will come into play after all your lines are laid out). Screw a temporary 1 x 3 support rail to the wall, aligning the top edge of the rail with the line for the bottom edge of the wall cabinets. Attach it by driving 3 or 4 two inch screws through the rail into the wall studs. 5. Now that we have all the lines marked, it is time to start installing your kitchen cabinets.
Kitchen Cabinet Finishes There are many Kitchen cabinet finishes to choose from when using natural woods. Cabinet finishes include stain, paint and glazing options. In addition there are my types of distressing techniques that can also be employed on kitchen cabinet surfaces. Some options include Rasping, Antiquing and Rub-through. There are also many types of laminates that you can choose from. Kitchen Cabinet Sizes Kitchen cabinets come in a variety of standard shapes and sizes, however custom sizes can also be easily specified and manufactured - at a price. Standards kitchen cabinet sizes, known as stock cabinets, are usually much more affordable then custom or semi-custom cabinets and usually have shorter lead times. Most manufacturers, unless custom built, stock universal sizes so if you have a kitchen designed at supply store or by a designer it will usually be transferable to another cabinet line.