Bisaillon Kitchen Cabinets December 29th, 2017 - 13:01:32
Door styles include shaker, flat, and inset. Choosing the perfect kind is important since it could be the biggest kitchen expense. Shaker cabinets are the most common door style. It is a five piece flat panel that has a frame made from four pieces and a single flat center panel for the fifth piece. Flat panel doors are simple and stylish and do not have any expensive details. They contain hard lines and a minimalist form that makes it perfect for contemporary and modern kitchens. Flat panel cabinets work best in modern kitchens. Hardware needs to match this style. Clean and simple pulls look contemporary and work well with this cabinet style.
Purchasing the ready to assemble kitchen cabinets will always be a good option. These cabinets are very easy to fix as they do not require much time like any other cabinets which require days to fix. For the installation purpose of these cabinets, one can either do it himself or one can also take the help or hire some professional to do the job in the right way such as a carpenter or handyman to get the installation done. These cabinets will definitely benefit any person who chooses them as they are easy to fix and are far better than the customized cabinets. When you will visit the market place for finding the assemble cabinets you will find many offers by the sellers of discounts. Getting the discount kitchen cabinets will be a nice idea of saving money. But the very first thing to come into your mind should not be money but the quality of the cabinets as they are to be fixed in your kitchen for high efficiency work. If you will go for the cheaper ones they will probably wear out within less time and that will result in a complete waste of your money. Therefore, make a wise decision that would be beneficial in the long term.
Now that you have your new kitchen cabinets, you are ready to move on to the next big step.....Installing your kitchen cabinets. While the actual installation of the Kitchen Cabinets isntall that hard, the critical first step is measuring and marking out where the cabinets will go. By placing layout markings on the walls and floors, it will not only help you with kitchen cabinet placement and stud locations, but it will also help you locate where adjustments and shims will be required. Before we get started there are a couple of items that you will need for the project: Pencil Level or Laser Level Drill Tape Measure Stud Finder Clamps 1" x 3" Piece of lumber (6-8 in length) or an Inverted U-shaped frame (see notes below) Shims Screws (long enough to go 1 1/2 into the studs) Utility knife or chisel Marking Compass An extra set of hands (you may have to bribe one of your friends).
We are going to start with the corner cabinet (here is where your helpers extra set of hands will be needed). Place the corner cabinet onto the temporary support rail and have your helper hold the corner cabinet in place. Drill pilot holes through the sturdy cabinet back or its support rail and into the wall studs. Screw the cabinet into the wall using two screws that are long enough to penetrate the studs by at least 1 1/2 inches. Check the top of the cabinet for level and the front of the cabinet for plumb. If you have to correct the position, just back the screws out a little bit and top shims behind the cabinet at the stud locations. If it is plumb and level, drive the screws all the way in and add several more into each stud to ensure that the cabinet is secured tightly to the wall.